home made water well drilling rig swivel

2023-06-05

Taking on a well-digging project on your property? You’ll need a top-notch water well drilling rig swivel to make sure your equipment can pivot and sway while you dig ever deeper into the earth. This piece is vital for ensuring your project moves forwards with ease.

If the prices of market-available swivels are too steep for your budget, an ideal way to obtain one is to construct your own drill rig swivel. With this DIY tutorial, you can conveniently construct an affordable swivel that matches your drilling outfit flawlessly. No need to break the bank on a pre-made option when forming your own is this easy!

It’s easy to get started on your project when you have the right supplies. You’ll need two 8-inch PVC pipes, four 1-inch PVC elbow joints, two 1-inch PVC tees, one 1-inch PVC male adapter, one 1-inch PVC female adapter, one 1-inch PVC ball valve, PVC cement, Teflon tape, a 3/8-inch steel rod, a drill with a 3/8-inch drill bit, and a nut and bolt. To begin, take out the saw and cut your PVC pipes to size.

To prepare your PVC pipes, grab a saw or pipe cutter and saw off two sections that are 4 inches in length, as well as two sections that measure 2 inches.

Attaching PVC Pipes: The Next Step

Start off by attaching a 4-inch length of PVC piping to each 1-inch PVC elbow joint. Subsequently, a 2-inch section of PVC should be affixed to the end of each elbow. Finally, the two separate elbows should be connected at the 1-inch PVC tee.

Step 3: Connecting the Male and Female Fittings.

Couple the 1-inch male adapter to the underside of one 1-inch PVC tee, and mesh the 1-inch female adapter to the top of the other PVC tee.

Step 4: Put the Ball Valve in Place

Secure the 1-inch PVC ball valve to the second tee’s unattached end, wrapping it in Teflon tape and then securely sealing it with PVC cement. It is crucial that the valve’s handle is facing outwards for visibility and ease of access.

Step 5: Designing the Swivelling Component

Cut off a portion of PVC pipe that is 6 inches long and pierce a hole in the center of it using a 3/8-inch drill bit. To secure it, fit a metal rod into the newly-made hole and affix the rod to the PVC pipe with a combination of a nut and bolt. Attaching the swivel piece to the top of the ball valve utilizing the extra 1-inch PVC tee constitutes the last step.

Assessing the Pivotability

Activate the ball valve and examine the rotation of the swivel. If it’s not turning freely, then carefully adjust the steel rod for smooth, effortless movement.

With this straightforward guide, you can have a cost-effective DIY water well drilling rig swivel assembled in no time. Constructing your own drilling equipment can be an incredibly satisfying experience and this guide offers a simple and budget-friendly option for anyone seeking to drill a well in their backyard or on their land. Take it on as your next project and enjoy the thrill of making your own gear.